-
One Piece Deck - Folded to Make Sides Stronger with Underneath Skids Added Five (5) Year Limited Warranty on Gearbox Powder Coat Paint Stump Jumper Adjustable Tailwheel Hole in Deck for Easy Blade Replacement Two Brace to the Rear with Flex Point Built In Available in 4' - 5' and 6' Cutting Widths
-
Available in 6' & 7' Cutting Width • Powder Paint Finish • 10 gauge Metal Deck • Limited Five (5) Year Warranty on Gearbox • Standard w/85hp gearbox • Series #6 PTO Driveline w/Slip Clutch • CAT 1 – CAT 2 Hitch • Quick Hitch Capable • Adjustable Two (2) Tailwheels Standard • Hole in Deck for Easy Blade Replacement • Stump Jumper • Replaceable Skid Plates • Flex Hitch and Braces to Rear Factory Installed Front and Rear Safety Chains Optional
-
Category II - 3 Point Hitch 120 HP Center T-Box, 2 - 85 HP Outboard Gearboxes Adjustable Dual Tailwheels Free Swinging Blades Front & Rear Chain Guards Stump Jumper Style Blade Carrier Series 5 Slip Clutch PTO Shaft - Quick Release
-
SPECIFICATIONS:
- Category I - Clevis Hitch
- 3" x 3" x 1/4" Main Frame & Cross Members
- 3/16" Side Plates
- 2 - Beveled, Reversible, Replaceable Cutting Edges
- Available in 5' - 6' - 7' Cutting Widths
- FOR TRACTORS 33 HP TO 55 HP
Approximate Weights:5' Model: 425 lbs.6' Model: 450 lbs.7' Model: 550 lbs. -
LOAD, LIFT AND TRANSPORT HARD TO HANDLE LOADS QUICKLY AND EASILY
-
- 15” New Tires and Wheels
- ½” x 6” Grader Blade
- Comes in 8', 10', and 12'
- Hydraulic Hose and Cylinder Kit available at extra cost
-
- Welded Assembly
- ¼” End Plates
- Formed Heavy Gauge Mold Board
- 3 Point Clevis Hitch - Category I
- Available Widths: 4’ – 5’ – 6’ – 7’ – 8’ (ordered as HD-4C, HD-5C, HD-6C, HD-7C, OR HD-8C)
- Removable Shanks
- Two Adjustable Cast Iron Cutting Edges – Bolted, Reversible, Beveled
-
1 Row Stiff Shank Cultivator
FORD™ TYPE DESIGN 1 ROW (5 SHANK) POINTS NOT INCLUDED EASILY ADJUSTABLE FOR DIFFERENT ROW WIDTHS STIFF SHANK DESIGN 3 POINT HITCH - CAT. I WEIGHT: 190lbs Covington Planter can be mounted (as shown in pictures)2 Row Stiff Shank Cultivator
FORD™ TYPE DESIGN 2 ROW (9 SHANK) POINTS NOT INCLUDED EASILY ADJUSTABLE FOR DIFFERENT ROW WIDTHS STIFF SHANK DESIGN 3 POINT HITCH - CAT. I WEIGHT: 330lbs Covington Planter can be mounted (as shown in pictures) -
This is the 48″, 60", 66", or 72" wide compact tractor root rake grapple attachment. This grapple is designed for raking and grappling all kinds of material, logs, brush, and other types of debris. This is a single cylinder design that is extremely durable but at the same time lightweight for small compact tractors. This is made for tractor loaders with less than 45 HP. This shallow design allows you to hold more weight close to your loader pivot point. Pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.Specifications:Weight – 275 PoundsCylinder – 2″ Bore x 8″ Stroke3″ x 3″ Square Tubing3/8″ Thick TinesPowder Coated Green PaintComes Complete with Hydraulic Hoses and Male/Female AG/Pioneer CouplersIncludes Protective Hydraulic Hose Sleeve Cover’sMade in the U.S.!Don’t have auxiliary hydraulics on your tractor?– We also sell hose extensions and 3rd function valve kits!Please feel free to contact us with any questions!
-
This is a brand new 60″, 66", or 72" dual cylinder grapple for a John Deere compact tractor loader. This is a great attachment for moving brush or debris with your loader. This Grapple is Perfect for the Weekend Warrior! Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.Specifications:Width – 60″, 66", or 72"Weight – 500 Pounds2″ x 8″ Tie Rod CylindersSteel Covers over Hydraulic Cylinders3/8″ Thick Sides, Middles, and TongsTeeth are Serrated for Extra BiteHydraulic Lines are rated for 3,000 PSIComes with Hydraulic Hoses and 1/2″ Standard Flat Face CouplersPowder Coated Green Paint to match your John Deere TractorJohn Deere Tractor Mounting SystemRecommended Machines Size – Less than 50 HPMADE IN THE USA!!!
-
This is an 72″ wide dual cylinder root grapple bucket for a John Deere tractor loader. This grapple is a very heavy duty design and is perfect for clearing brush, logs, and general debris. The tooth design on this grapple are also designed to be able to dig up roots and rake the surface of the ground. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders. Specifications: Weight – 850 Pounds Width – 72″ Steel – A36 Grapple Depth – 34″ Tine Spacing – 8.5″ Square Tubing – 4″ (1/4″ Thick Wall) Length of Teeth – 10″ Middle Metal Thickness – 1/2″ Thickness of Tongs – 1/2″ Cylinder Dimensions: 2″ Bore x 10″ Stroke Cylinder PSI – 3000 PSI Couplers – Male/Female 1/2″ Ag/Pioneer Couplers
-
This is a new 48″ Root Grapple for a John Deere compact tractor. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders. Hoses and standard flat face coupler’s are included Ready to hook to your skid steer or tractor ( with skid steer mount ) and go to work Thickness of metal – 3/8″ Spacing – 9″ Cylinder size – 2″ X 8″ Grapple opens 35″ Weighs 450 pounds Powder coated paint (Green) Protective covering over cylinder
-
This is a brand new 36″, 42", 48" or 54" wide heavy duty root grapple attachment designed for mini skid steer wheel and track loaders. This grapple has the same features as our severe duty full size grapples, but in a compact design for the mini loaders. Features the mini universal mounting system designed for Toro Dingo, Vermeer, Ditch Witch, Thomas, Ramrod, Boxer and many more machines! Specifications: Weight – 275 lbs. - 350 lbs Width – 36″ Grapple Opening – 36″ Wide Tine Spacing – 4.5″ Tine Thickness – 3/8″ Grapple Tong Width – 32″ Interior Bucket Depth – 26″ Grease Fittings at all Pivot Points Cylinder – 2″ bore X 10″ Stroke Couplers – Standard 1/2″ Flat Face with 90 Degree Fittings Paint – Powder Coated Black Steel – A36 Metal Made in the USA Note: This will not fit Bobcat MT or ASV/Terex machines.
-
This is a new 36", 42", 48″ or 53" wide bucket grapple attachment designed for a mini skid steer loader. This attachment has the toro dingo style mounting system which will fit the Toro Dingo, Vermeer, Ditch Witch, Boxer, Finn, Thomas, Ramrod and many more machines. Specifications: Weight – 275, 300, 325, 350, or 425 Pounds Width – 48″ Cylinder – 2″ Bore x 10″ Stroke Grapple Opening – 36″ Top Tine Thickness – 3/8″ Cutting Edge – 1/2″ x 4″ Bolt On Reversible Cutting Edge Comes with Hoses and 1/2″ Flat Face Couplers Powder Coated Black Paint Made in the United States Will fit all Mini Skid Steer Models that use the Universal Mini Skid Steer Hookup System – The Bobcat MT series will NOT fit this attachment.
-
This is a brand new 48″ wide heavy duty root rake grapple attachment designed for mini skid steer wheel and track loaders. This dual cylinder model features separate tongs to grab and hold uneven loads. This model features the mini universal mounting system designed for Toro Dingo, Vermeer, Ditch Witch, Thomas, Ramrod, Boxer and many more machines! Specifications: Weight – 375 lbs. Width – 47.5″ Grapple Opening – 32″ Wide Tine Spacing – 8.5″ Tine Thickness – 3/8″ Grapple Tong Width – 32″ Overall Length – 20″ Overall Height – 31″ Cylinder – 2″ bore X 8″ Stroke Couplers – Standard 1/2″ Flat Face with 90 Degree Fittings Paint – Powder Coated Black Steel – A36 Metal Made in the USA Note: This will not fit Bobcat MT or ASV/Terex machines.
Call Us Today! (601) 597-7384
